Tyvek®double sided acrylic tape is meant:
• To connect the diffusive membrane with even surfaces.
• Suitable for vapor isolation.
• To interconnect the diffusive membrane.
Name: 1310D; Tyvek® double sided acrylic tape
Composition of the material: acrylic glue / polyvinyl acetate – net
Peculiarities and advantages
• The product is meant for building industry. Tyvek® tape adheres perfectly to Tyvek® diffusive membranes and to other materials of wide range (polyethylene, polypropylene, plastic, masonry, metal, wood, etc.).
• The most suitable adherence with even surfaces.
• May be used in the conditions of high humidity.
• Excellent resistance to aging, water, humidity, environmental impact, and chemicals.
• Suit to seal the junctions of membrane, roof, walls and floors, gaps by pipes, electric wires, antennas, chimneys, and ventilation chimneys.
• High initial adherence module.
| PARAMETERS | UNIT | NOMINAL VALUE (average) |
|
Roll’s length |
m | 25 |
|
Roll’s width |
cm | 5 |
|
Weight (without internal base) |
g/m² | 140 |
|
Thickness |
μm | 150 |
|
Color |
clear | |
|
Composition |
glue / polyvinyl acetate – net | |
|
Weight of protective paper |
g/m² | 80 |
|
Work temperature |
°C | > 0 (recommended) |
|
Temperature range of usage |
°C |
from -40 to +80 |
Storage and installation conditions
• Before usage it is recommended to make sure whether the tape is suitable for usage for intended purpose
• In order to receive the ideal adherence, the surface has to be dry and clean (without any dirt, fats or solvents).
• The tape is cut by sharp and safe cutter (scissors are not recommended).
• The tape’s rolls have to be kept in clean and dry environment. The storage temperature has to be between +10 °C and +30 °C, and the direct sunlight must be avoided.
Made by DuPont™, Luxembourg
